Application:
It is used for coal sample preparation automatically in the fields of power, coal, chemistry industry, construction materials, inspection, environmental protection and academic institutio
sales@sandegroup.com
0086-731-88112150
Sales Contact
0086 731 88112150
0086 731 89864000
0086 731 88134650
Quick Links
Hunan Sundy Science and Technology CO.,LTD
No.558 West Tongzipo Road,
Yuelu Disctrict,
Changsha, Hunan Province, China P.R
Copyright©HunanSundy Science and Technology Co., Ltd. 2017 湘ICP备10204722号 www.300.cn Changsha Backstage
SDPS1000 All-pass sample preparation system
描述一
Adopt durable parts with long service life for crushing, dividing, lifting, pulverizing, etc.
描述二
Remote control and diagnose system can monitor the operation of the system to warn and predict.
Product description
Features：
1.Applicable for all types of coal sample with all range of moisture level
No adhesion, no blockage, no blending, sample pulverizing full automatic with high level of representativeness and key technology of “quick drying with wind penetration at low temperature” and “umbrella spins”.
2. Good sample representativeness
Pulverized sample collection rate is higher than 95% and sieving rate is 100%.
3. Full automatic for the whole sample preparation process, real unattended operation, no system bias
Automatic iron removing, sample transportation, sample weighing, crushing, dividing, drying, pulverizing, packing, discarding sample recycling, etc., whole process unattended.
4. High productivity, continuously sample feeding available, short sample preparation time and high efficiency
Shortest sample feeding interval is 12 min. Up to 60 samples can be prepared within 8 hours (high efficiency model). Comparing with manual preparation, the efficiency is much higher with lower labor intensity.
5. Stable operation and convenient maintenance
① Adopt durable parts with long service life for crushing, dividing, lifting, pulverizing, etc.
② Remote control and diagnose system can monitor the operation of the system to warn and predict. Preventive maintenance can be provided to reduce system failure rate and enhance reliability.
6. Safety while environmental protection7. Small space occupation, good adaptability
Standard system can be installed in present sample preparation room.
Specifications：
|
Feeding sample weight |
20〜2000kg |
|
Feeding size |
≤100mm |
|
Discharge size/weight/quantity： |
|
|
Total moisture |
6mm/≥1.25kg/1〜4 pieces；13mm/≥3kg/1〜4 pieces(Optional) |
|
Back up sample |
3mm/≥700g/1〜2 pieces pieces (Optional) |
|
Analysis sample |
0.2mm/≥95g/1〜2 pieces |
|
Moisture adaptability |
No moisture limitation |
|
Efficiency： |
|
|
Single sample |
30-35min |
|
Continuous sample feeding： |
|
|
Continuous sample feeding： |
12-13min/each, 40 pieces samples can be finishedthe preparation within 8 hours |
|
Enhanced configuration |
8-13min/each, 60 pieces samples can be finished thepreparation within 8 hours |
|
Drying method |
Low temperature with wind penetration |
|
Division method |
Fixed mass dividing + fixed ratio dividing; Belt divider+ rotary divider + riffle divider |
|
Max power |
82kW |
|
Power requirement |
380V/50Hz |
|
Installation requirement (length x width x height)： |
|
|
16.7m x 4.6m x 3.1m (Automatic sample storing & checking cabinet, online total moisture |
|
Features
1. Applicable for all types of coal sample with all range of moisture level
No adhesion, no blockage, no blending, sample pulverizing full automatic with high level of representativeness and key technology of “quick drying with wind penetration at low temperature” and “umbrella spins”.
2. Good sample representativeness
Pulverized sample collection rate is higher than 95% and sieving rate is 100%.
3. Full automatic for the whole sample preparation process, real unattended operation, no system bias
Automatic iron removing, sample transportation, sample weighing, crushing, dividing, drying, pulverizing, packing, discarding sample recycling, etc., whole process unattended.
4. High productivity, continuously sample feeding available, short sample preparation time and high efficiency
Shortest sample feeding interval is 12 min. Up to 60 samples can be prepared within 8 hours (high efficiency model).
Comparing with manual preparation, the efficiency is much higher with lower labor intensity.
5. Stable operation and convenient maintenance
① Adopt durable parts with long service life for crushing, dividing, lifting, pulverizing, etc.
② Remote control and diagnose system can monitor the operation of the system to warn and predict. Preventive maintenance
can be provided to reduce system failure rate and enhance reliability.
6. Safety with environmental protection
7. Small space occupation, good adaptability
Standard system can be installed in present sample preparation room.
SDOMT Online total moisture test system
Next article
